Harbor Freight Tools 6 in. Bench Grinder with Gooseneck Lamp Instrukcja Obsługi Pobierz pdf (Strona 8)

Page 8 For technical questions, please call 1-888-866-5797. Item 37822 39797 39798

SAFETY OPERATION MAINTENANCESETUP

Instructions for putting into use

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under

subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the tool off and unplug it before assembling or making any

adjustments to the tool.

Note: For additional information regarding the parts listed in the following

pages, refer to the Assembly Diagram near the end of this manual.

Assembly

1. Installing Tool Rests -

a. Turn the Grinder off and unplug it.

FIGURE 1

Install adjustable rests (22 and

35) to the wheel guards (7 and

27) as shown in Figure 1. Use

bolts and washers to secure them

in place as shown in Figure 1.

Note: There is a left and a right tool

rest. Refer to Figure 1 to be certain

that you install them correctly.

c. The tool rests should be adjusted to

within 1/16” of the grinding wheel. To

adjust this distance, move Adjustable

Rests (22 and 35) by loosening bolts

and moving them to the proper position.

2. Installing Spark Guards -

FIGURE 2

Select spark guards (17 and 18), washer

and bolt. Install the right spark guard to

the wheel guard as shown in Figure 2.

b. Adjust the spark guard to within 1/16” of

the grinding wheel. Repeat for left side.

Note: There is a left and right spark

guard. Refer to Figure 2 to be certain

that you install them correctly.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Harbor Freight Tools 6 in. Bench Grinder with Gooseneck Lamp Instrukcja Obsługi Strona 8