Harbor-freight-tools 32871 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Page 5SKU 32871

For technical questions, please call 1-800-444-3353.

OPERATION

Setup

Frequent, but not excessive, lubrication is required for best performance. Oil added through the

airline connection will lubricate internal parts. An automatic airline oiler is recommended but oil

may be added manually before every operation or after about 1 hour of continuous use. Only 4

to 5 drops of oil at a time are necessary. Too much oil will collect inside the tool and be blown

out during the exhaust cycle. ONLY USE PNEUMATIC TOOL OIL. Do not use detergent oil or

additives as these lubricants will cause accelerated wear to the seals in the tool.

Dirtandwaterintheairsupplyaremajorcausesofpneumatictoolwear.Usealter/oilerfor

betterperformanceandlongerlife.Theltermusthaveadequateowcapacityforthespecic

application.Consultthemanufacturer’sinstructionsforpropermaintenanceofyourlter.

The connector on the tool must not hold pressure when the air supply is disconnected. If the wrong

ttingisused,thetoolcanremainchargedwithairafterbeingdisconnectedandstillbeableto

drive a fastener. See Figure 1 for the recommended accessories and connection order.

Figure 1 — Airline Oiler

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Harbor-freight-tools 32871 Instrukcja Użytkownika Strona 5