Harbor Freight Tools 18 Volt 1/2 in. Cordless Variable Speed Drill/Driver Instrukcja Obsługi Strona 3
- Strona / 16
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Page 3For technical questions, please call 1-888-866-5797.Item 62427
SAFETYOPERATIONMAINTENANCE SETUP
Electrical Safety
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
2. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
3. Prevent unintentional starting.
Ensure the Trigger is in the off-position before
connecting to power source, picking up or
carrying the tool.
Carrying power tools with your finger on
the Trigger or energizing power tools that
have the Trigger on invites accidents.
4. Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust‑related hazards.
8. Only use safety equipment that has been
approved by an appropriate standards agency.
Unapproved safety equipment may not provide
adequate protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area.
Power Tool Use and Care
1. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
2. Do not use the power tool if the Trigger
does not turn it on and off.
Any power tool that cannot be controlled with the
Trigger is dangerous and must be repaired.
3. Disconnect the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
- DRILL/DRIVER 1
- IMPORTANT SAFETY INFORMATION 2
- Personal Safety 3
- Power Tool Use and Care 3
- Electrical Safety 3
- Battery tool use and care 4
- Drill Safety Warnings 4
- Screwdriver Safety Warnings 4
- SAVE THESE INSTRUCTIONS 5
- Extension Cords 6
- Symbology 6
- Specifications 7
- Functions 8
- Charger Indicator LED’s 8
- Tool Set Up 9
- Charging 10
- Maintenance and Servicing 12
- Troubleshooting 13
- Parts List 14
- Assembly Diagram 15
- Limited 90 Day Warranty 16
Powiązane produkty i podręczniki dla Elektronarzędzia Harbor Freight Tools 18 Volt 1/2 in. Cordless Variable Speed Drill/Driver
Elektronarzędzia Harbor Freight Tools 4 ton Heavy Duty Portable Hydraulic Equipment Kit Instrukcja Obsługi
(16 strony)
(16 strony)
Elektronarzędzia Harbor Freight Tools 120 Volt Portable Utility Pump 1500 GPH Instrukcja Obsługi
(12 strony)
(12 strony)
MTD 08M9 manuals
Owner’s manuals and user’s guides for Lawnmowers MTD 08M9.
We providing 1 pdf manuals MTD 08M9 for download free by document types: Specifications
Komentarze do niniejszej Instrukcji